Installation of individual houses typical design economic way to reduce construction costs by 25%, as in this case, you can save money not only on the design and installation of bearing masonry base, but also on the development and implementation of individual project construction supervision. Individual elements of typical wooden houses light, the mass of panels does not exceed 100 kg, installation support structure, a manual, is also not difficult for an individual developer. Houses made of concrete or ceramic panels because of the large mass of structures and the complexity of their connections can not be built by hand. In this case, the economic means you can only perform excavation and concrete foundation. The cost of construction compared to the traditional way will be reduced slightly - no more than 5%. Houses of traditional brick with concrete floors and naslonnymi rafters of wooden beams (the most common method of construction in Czechoslovakia) for the production of labor intensive construction. The cost of construction while shrinking slightly - up to 10%. Constructive solution of a complex of houses, a large number of small elements requires participation in the construction of special skilled workers. For more on this later. House of the blocks, made an industrial method of porous concrete or cinder block (steel or fuel) is often erected by the economic way. The volume of construction work at the same time depends on the type of blocks.